| |
FUNMAT PRO 610 HT |
| Printing Technology |
Fused Filament Fabrication (FFF) |
| Build Volume |
610 × 508 × 508mm |
| Build Platform |
Vacuum System |
| Leveling |
Automatic Leveling |
| Layer Thickness |
0.05-0.5mm |
| Printing Speed |
MAX Travel Speed XY: 500mm/s Z : 3 00mm/s |
| Printing Nozzles |
2 Printing Nozzles Without Scratching |
| Extruder Temperature |
Max. 500℃ |
| Platform Temperature |
Max. 300℃ |
| Chamber Temperature |
Max. 300℃ |
| Filament Chamber Temperature |
Max. 70℃ |
| Input File Type |
STL, OBJ |
| Filament Diameter |
1.75mm/2.85mm |
| Position Resolution |
XY: 12μm Z: 7μm |
| Motor Drive |
High Precision Servo System |
| Smart Monitor & Control |
Auto-cleaning Nozzles, Filament Jam Warning, Filament Absence Warning, Power Failure Recovery, Water and Active Air Cooling, Over Heat Protection |
| Safety Certification |
FCC and CE |
| Connectivity |
WIFI, Internet, USB |
| Supported Material |
PEEK, PEEK+CF, PEKK, ULTEM (PEI), PPSU, PC, PC Alloys, PA, PA+CF, ABS, |
| |
Carbon Fiber-Filled, Metal-Filled, Fiberglass-Filled, ASA, PETG, ESD-Safe, HIPS, TPU, PLA, PVA, etc. |
Additiva AB | Elsa Brändströms gata 62b | SE-129 52 | HÄGERSTEN | 08-100 117 |